Proveedor de Herramientas Profesionales Wera en México: Calidad alemana a tu alcance
- La cantidad mínima debería ser 10 de "3840/4 Puntas hexagonales, acero inoxidable, 5/32″ x 89 mm"
No Chlorides or Nitrates
Staticide®30 Concentrate provides the same long-lasting static protection associated with the Staticide® name, but in a non-flammable formula with superior wetting properties.
Staticide when properly used and applied on a material can be considered and classified as low charging according to the low charging packaging material properties described in ANSI/ESD S541-2019 when tested according to ESD ADV11.21.
The Staticide® 30 Concentrate is ideal for the manufacture of shielding bags because it contains no contaminants like chlorides or silicone. The formula does not include substances on the REACH SvHC list or in the RoHS Directive 2002/95/EC.
- Non-flammable
- No contaminants such as chlorides or silicone
- Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
- Proven effective in relative humidity below 15%
- Surface resistance between 10e8 to 10e10 ohms
- Dilute with water or isopropyl alcohol
Low-Cost Static Protection
Staticide® 4018 Acrylic Floor Polish offers static protection at an economical price. This low-cost formula leaves a durable, glossy finish that can last up to six months with proper maintenance, making it a popular choice for companies with industrial areas where frequent cleaning is necessary. Suitable for production areas, warehousing, shipping, laboratories, and electronic repair facilities.
Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.
- Coverage is approximately 1500 – 2000 sq. ft. per gallon
- V.O.C. is less than 4%
- Solids are 18%± 5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
- Surface resistance (RTT): 108 – 109 ohms @ 100v at 12 RH
- Strip cycle is 6 months
- Use on vinyl, linoleum, or ceramic tile
Biodegradable, Low-Foaming Formula
Staticide® Anti-Static Floor Stripper provides a completely clean and finish-ready surface by emulsifying dirt and residual particles of old wax and acrylic floor finishes. Effective in hard or soft water, this biodegradable, low-foaming formula removes multiple coats of synthetic floor finishes and embedded dirt without damaging or dulling floors. When used at proper dilutions, stripper is balanced so that neutral cleaning is not necessary.
- No ammonia or phosphates
- Low V.O.C.
- Zero tribogeneration
- Biodegradable
- Covers approximately 5000 sq. ft. per gallon
- Dilute 1:4 (stripper to water)
Staticide® wipes are the ideal anti-static applicator for keeping electronics and equipment clean and static-free. Staticide® wipes have the same long-lasting protection against static as our Staticide® topical liquids, but offer a one-step cleaning and static control solution.
Staticide® anti-static wipes are safe to use around electronics, and since Staticide® will prevent dust buildup and dust attraction, computer and laptop screens will stay clean longer just by wiping the plastic housing (avoid wiping directly on screen). Staticide® wipes can also be used on industrial machinery and parts, and they are great to use in tight spaces.
Staticide when properly used and applied on a material can be considered and classified as low charging according to the low charging packaging material properties described in ANSI/ESD S541-2019 when tested according to ESD ADV11.21.
This product is not for consumer use in California as it contains 30-40% isopropyl alcohol and does not meet CARB VOC rules.
Product #SW12 24 wipes per box; 12 boxes per case Product #2450 450 wipes
Portable ESD Protection
ACL Staticide® Conductive Trays provide ESD protection for static sensitive electronic components during handling and transportation. Stackable and durable, ACL’s Conductive Trays have excellent abrasion resistance and can withstand chemical damage. Made from fiberglass and UP resin with conductive additives, these trays will not outgas or lose electrical properties even after washing.
Meeting both ANSI/ESD S20.20 and European IEC 613450-5-1 guidelines, electronic components and assemblies can be transported safely.
- Smooth finish
- Resistant to abrasion and chemicals
- Temperature Range: 40°F to 225°F (5°C -107°C)
- Conductive: less than 10e6 ohms RTT, RTG, Vol R
- Decays in less than 2 seconds
- RoHS3, REACH complaint
Ideal for One-Time Use
The ACL Staticide Disposable Heel Strap is an economical solution for plant visitors and other temporary workers who enter Electrostatic Protected Areas (EPAs). Easy-to-use and comfortable to wear, the Disposable Heel Strap offers convenient accessibility for quick floor walk-ons.
The anti-static non-woven fabric contains conductive yarn for a continuous path-to-ground between the user and ESD-safe floor. High strength adhesive prevents slippage for added security. To ensure correct contact is made, heel straps can be tested with ACL’s 780 and 750 personal grounding testers.
- Yellow and black
- 99% polyester, 1% conductive yarn
- Compliant with ANSI/ESD S20.20 and IEC 61340-5-1
- Resistance: 10e5 ohms
- RoHS compliant
ESD Assembly Inspection Glove
ACL Staticide Knit ESD Gloves protect against static discharge without sacrificing ergonomic performance. Static control and comfort makes these gloves ideal for detailed assembly and inspection work.
The blended nylon-conductive carbon yarn reduces tribocharging and integrates volume resistivity throughout the fabric for maximum static control. Lightweight and seamless in construction, Staticide Knit ESD Gloves with spandex cuffs provide a comfortable breathable fit with low moisture absorption. The micro-knit fingertips offer superb dexterity, and for additional durability and grip, these gloves are available with micro-foam polyurethane-coated fingertips.
Ideal for ESD-sensitive areas, electronics manufacturing, inspection, assembly and packaging.
Available in micro-knit fingertips for dexterity or dipped for durability.
- Seamless knit construction
- Nylon conductive carbon fiber blend yarn
- GLK CAFE RGP: 10e7 ohms as per ANSI/ESD SP15.1 @ 12%RH for 48 hours (average)
- GLKT CAFE RGP: 10e8 ohms as per ANSI/ESD SP15.1 @ 12%RH for 48 hours (average)
ESD Assembly Inspection Glove
ACL Staticide Knit ESD Gloves protect against static discharge without sacrificing ergonomic performance. Static control and comfort makes these gloves ideal for detailed assembly and inspection work.
The blended nylon-conductive carbon yarn reduces tribocharging and integrates volume resistivity throughout the fabric for maximum static control. Lightweight and seamless in construction, Staticide Knit ESD Gloves with spandex cuffs provide a comfortable breathable fit with low moisture absorption. The micro-knit fingertips offer superb dexterity, and for additional durability and grip, these gloves are available with micro-foam polyurethane-coated fingertips.
Ideal for ESD-sensitive areas, electronics manufacturing, inspection, assembly and packaging.
Available in micro-knit fingertips for dexterity or dipped for durability.
- Seamless knit construction
- Nylon conductive carbon fiber blend yarn
- GLK CAFE RGP: 10e7 ohms as per ANSI/ESD SP15.1 @ 12%RH for 48 hours (average)
- GLKT CAFE RGP: 10e8 ohms as per ANSI/ESD SP15.1 @ 12%RH for 48 hours (average)
Advanced Dissipative Static Control
The Staticide® ESD Safety Shield coatings are made of a proprietary blend of conducting polymers which allows the coating to be inherently dissipative regardless of ambient relative humidity. Unlike surfactants, this Pedot formulation provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity.
Intended for indoor use, the Staticide® ESD Safety Shield is simple to use since it is a water-based one-part system. Whether applied by spraying, flow coat, dipping, or foam brush, the coating will be translucent without appearing «milky».
Staticide® ESD Safety Shield’s low V.O.C. formulation will not outgas harmful or volatile components once dry. It is RoHS compliant and meets ANSI/ESD S20.20 for static dissipation.
Like our Staticide® topicals, in the right situation Staticide® ESD Safety Shield provides a cost-effective solution without sacrificing efficiency and quality. It is suitable to use where static interferes with production assembly and ideal to use in static control environments to prevent ESD events. Use on electronic packaging, conveyor parts, and on objects in electronic assembly work areas.
Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships the ESD Safety Shield on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.
- Surface resistivity of 106 to 109 ohms/sq.
- Water-based acrylic
- Translucent without appearing «milky»
- Adheres to a variety of plastics without chipping or peeling
- Meets ANSI/ESD S20.20 for static dissipation
- Can be applied via flow coat, dipping, foam brush, or spray
- Ambient cure
Anti-Static Aerosol Formula
The 6500 formula, like the 6300, is designed for applications on common plastics such as acrylic, PET, PETG, PVC, and polycarbonate, but it is available in an economical aerosol container. A light spray application is sufficient for excellent electrical performance. Coating cures at ambient temperature. Intended for indoor use, this product is ideal for plastic parts, bins, and shelving. Our tests show electricals will last at least two years.
- Surface resistance of 10e6 to 10e9 ohms
- Water-based
- Humidity independent
- Translucent without appearing «milky»
Static Dissipative Moisturizing Lotion
Moisture on skin is vital to wrist strap performance for personal grounding. ACL Staticide® Hi Tech Hand Lotion’s static dissipative formula moisturizes the skin for better bonding between the skin and wrist strap which is imperative in the electronics manufacturing industry.
Enriched with natural moisturizers, including aloe vera and vitamin E, Staticide® Hi Tech Hand Lotion will absorb quickly into the skin and encourage good skin health. Daily use of this hand lotion relieves and prevents dryness, flaking and irritation caused by the constant use of gloves and chemicals.
This non-acidic, greaseless formula contains no glycerin, silicone, lanolin or mineral oil. It absorbs quickly into the skin, providing good contact between the skin and wrist strap, and will not contaminate work surfaces, leaving your work area ESD safe.
- Static dissipative
- No glycerin, silicone, lanolin or mineral oil
- Improve wrist strap performance
- Fragrance-free
Technical Datasheets [English]
Anti-Static, Neutral, and Non-Abrasive
ACL anti-static neutral cleaners provide constant detergency and can be used in all facilities, as they leave no film or streaks and are safe for septic and sewage systems. Anti-static properties of production environments will not be degraded with these non-abrasive cleaners. Containing no phosphates or alkalis, ACL neutral cleaners are perfect products for cleaning ESD paint.
4020 Neutral Cleaner Concentrate will yield a high volume of cleaner allowing facilities to save on storage space and the cost of pre-mixed material. Convenient when used with auto scrubbers in large facilities.
- Dilute 1:128 cleaner to water
- Covers approximately 10,000 sq. ft. per gallon
- Use on concrete, painted floors, ESD tile, and ESD epoxy
Maintaining small spaces is easy and convenient with the ready-to-use 4030 Neutral Cleaner. No need to dilute, the 4030 formula is blended specifically for ESD tiles, ESD epoxy, and ESD paint. The low detergency of the cleaner will allow for streakless cleaning. Safe for production environments and sewage systems.
- Covers approximately 75 sq. ft. per gallon
- Use on concrete, painted floors, ESD tile, ESD epoxy and rubber & vinyl runners
Super Stretch for Lasting Wear
ACL Staticide Nitrile Laboratory Gloves safeguard against damage caused by contamination. Manufactured for strength, these disposable gloves offer excellent stretch and comfort without plasticizers, silicone, or powders. The inherent anti-static, low tribocharging nature of nitrile offers natural static protection without additives or carbon shedding.
When defending against skin and oil contamination, nitrile has long been a reliable alternative to latex. Nitrile is safer to use for those prone to skin irritations and latex allergies. The strength and durability provides longer wear times and chemical splash protection.
- Powder-free
- Anti-static nitrile
- 4 mil thickness
- Available in 9”
- Packed in double poly bags
- Made in the USA
Eliminate Static Control Problems
Staticide®, the original anti-static concentrate, is the key ingredient in many ACL anti-static solutions. Once diluted with water or isopropyl alcohol, it eliminates a host of static control problems – especially in the electronics, textiles and plastics industries. Staticide® Concentrate saves freight, handling, and storage costs for high production facilities while offering greater flexibility in dilution.
Staticide when properly used and applied on a material can be considered and classified as low charging according to the low charging packaging material properties described in ANSI/ESD S541-2019 when tested according to ESD ADV11.21.
Staticide® Original Concentrate can be mixed in the following concentrate to solvent ratios to obtain these Staticide® formulations:
- Heavy Duty Staticide® – 1 to 39 (1 part concentrate to 39 parts solvent)
- General Purpose Staticide® – 1 to 99 (1 part concentrate to 99 parts solvent)
- Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
- Surface resistance 10e9 to 10e10 ohms
Anti-Static Floor Cleaner
The Restorer Cleaner renews static decay properties, surface resistivity, and the durability of ACL floor finishes. Special conductive additives clean while simultaneously breaking down electrical discharge and returning floor finishes to safe specifications. No harmful chemicals like ammonia, phosphates, alkali, nonylphenol (NP), or nonylphenol ethoxylate (NPE) are used in the formulation. This special detergent can be applied with a mop or in a standard burnishing machine for easy application.
- Removes black heel marks
- Lengthens maintenance cycle
- Revitalizes gloss
- Dilution ratio 1:10 (1 part cleaner to 10 parts water)
- Covers approximately 1000 – 1500 square feet per diluted gallon
Staticide® Static Sentry is ideal for eliminating charge generation on both porous and non-porous materials. Preventing the generation of static has a multitude of benefits including minimizing system errors, preventing dust attraction, and removing static charges on garments and upholstery.
Use Staticide® Static Sentry for static electricity control on a variety of surfaces including laminate flooring, carpeting, work surfaces, plastics, and glass. It is safe to use in manufacturing facilities for static control on carrying trays, protective packaging, and smocks.
- Instantly eliminates a static charge in under 2 seconds
- Exceeds MIL-B-81705 specifications for static decay in accordance with Federal Test Standard 101, method 4046
- Safe to use on plastic and fabrics
- Ozone safe
- Humidity independent
- RoHS compliant
12oz (340g) aerosol can; 12 per case
Ideal for Any Static Control Environment
Whether revitalizing old ESD tiles or protecting a new epoxy floor, ACL’s Staticide® Ultra II Floor Finish will help safeguard your costly investment of specialized flooring. This distinctive anti-static blend is compatible with problematic plasticizers found in conductive and dissipative tiles and epoxy. Staticide® Ultra II is also the ultimate choice for adding gloss and static protection to concrete.
It is suitable for any static control environment, such as electronic, medical, and cleanroom manufacturing facilities, and for sensitive device manufacturing.
Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.
- Coverage is approximately 1500 – 2000 sq. ft. per gallon
- V.O.C. is less than 4%
- Solids are 21%± 5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
- Surface resistance (RTT): 107 – 109 ohms @ 100v at 12 RH
- Strip cycle is 12 – 18 months
- Use on concrete, epoxy, ESD epoxy, and dissipative tile
Ideal for Any Static Control Environment
Whether revitalizing old ESD tiles or protecting a new epoxy floor, ACL’s Staticide® Ultra II Floor Finish will help safeguard your costly investment of specialized flooring. This distinctive anti-static blend is compatible with problematic plasticizers found in conductive and dissipative tiles and epoxy. Staticide® Ultra II is also the ultimate choice for adding gloss and static protection to concrete.
It is suitable for any static control environment, such as electronic, medical, and cleanroom manufacturing facilities, and for sensitive device manufacturing.
Please be aware of extended lead times during winter. Due to the limited freeze cycles on this product, ACL only ships floor finishes and paint on Mondays and Tuesdays during the winter months. In cases of extreme temperatures and weather patterns, a shipping halt may occur.
- Coverage is approximately 1500 – 2000 sq. ft. per gallon
- V.O.C. is less than 4%
- Solids are 21%± 5%
- UL listed for slip resistance
- Compliant to ANSI/ESD S20.20
- Surface resistance (RTT): 107 – 109 ohms @ 100v at 12 RH
- Strip cycle is 12 – 18 months
- Use on concrete, epoxy, ESD epoxy, and dissipative tile
Con sistema de búsqueda «Take it easy»: marcas de color según el perfil y sellos con el tamaño. Aplicación: Para tornillos de ranura y Phillips Contenido: Juego de 5 piezas en embalaje de presentación + Bandeja
Con sistema de búsqueda «Take it easy»: marcas de color según el perfil y sellos con el tamaño. Aplicación: Para tornillos ranurados y Pozidriv Contenido: Juego de 5 piezas en embalaje de presentación + Bandeja
Con sistema de búsqueda «Take it easy»: marcas de color según el perfil y sellos con el tamaño. Aplicación: Para tornillos de ranura, Phillips y de cuadradillo interior Contenido: Juego de 5 piezas en embalaje de presentación + Bandeja
Con sistema de búsqueda «Take it easy»: marcas de color según el perfil y sellos con el tamaño. Aplicación: Para tornillos TORX® Contenido: Juego de 5 piezas en embalaje de presentación + Bandeja
Assurance Check for Packaging & Assembly Lines
The ACL 395 handheld meter features sophisticated circuitry that allows for the same advantages as megohmmeters, but at an economical price. Utilizing color-coded zones, the LED logarithmic scale is easy to read and evaluate. Half decades indicate where the measurement value falls within the decade giving a closer indication to actual value. The ACL 395 features rubber rails for superior contact.
Economical and lightweight, this indicator is perfect for assurance check for packaging and assembly lines. When the optional 5-lb probes are used, this audit kit will comply with IEC 61340-4-1, ANSI/ESD STM 4.1 & ANSI/ESD STM7.1 for RTG and RTT testing making it an economical choice for auditing in material production and laboratories.
Because this light weight meter is so easy to use, we recommend it to custodial personnel for checking and monitoring ESD workstations and floors for cleanliness.
- Four color LED display segments (including warning stage)
- Half decades for greater accuracy
- Rails: conductive rubber
- Dimensions: 2.8″ x 5.1″ x 1.4″
- Uses parallel bar electrodes as defined in ASTM D257
- Includes calibration certificate
Encuentra en nuestra ferretería la gama completa de herramientas Wera
Ferretería Wera: calidad alemana
En nuestra tienda online especializada en herramientas Wera encontrarás desde desarmadores Wera de precisión hasta carracas (ráchets) y llaves ajustables Wera para mecánicos profesionales. Cada kit Wera profesional que ofrecemos incluye puntas intercambiables con sistema Rapidaptor y perfiles Hex-Plus, ideales para trabajos de precisión en la industria automotriz y eléctrica.
Nuestra tienda cuenta con stock permanente de rotomartillos Wera, torquímetros (llaves dinamométricas) Wera y juegos de puntas VDE —certificados para trabajos hasta 1,000 V—, garantizando la seguridad y eficiencia en cada proyecto. Realizamos envíos express a Monterrey, Chihuahua y el norte de México, así como a todo el país, con seguimiento en línea y precios preferenciales por volumen de compra.
Asesoría experta y atención personalizada para profesionales
Como ferretería especializada, nuestro equipo te ayuda a elegir entre los últimos lanzamientos de Wera: desarmadores ergonómicos, llaves fija-corona y juegos de puntas de impacto. Te orientamos según tu industria —automotriz, eléctrica o industrial— para que inviertas en el kit Wera profesional que verdaderamente necesitas.
Además, ofrecemos guías técnicas y comparativas de herramientas Wera, con consejos prácticos sobre mantenimiento y uso seguro. Así, maximizarás la vida útil de tus carracas y llaves ajustables en cada servicio o reparación.
Nuestro soporte postventa incluye resolución de dudas y gestión rápida de garantías oficiales. Si detectas alguna falla en tu herramienta, te asistimos con los canales de la marca en México y agilizamos el envío de repuestos o reemplazos bajo garantía.
Garantía oficial Wera y envíos rápidos en el norte de México
Compra con confianza en nuestra ferretería: todas las herramientas Wera que vendemos cuentan con garantía oficial de fábrica directamente desde Alemania. Esto aplica a desarmadores, carracas, rotomartillos y torquímetros, brindándote respaldo ante cualquier desperfecto.
Nuestro almacén en Cd. Juárez y red de distribución a nivel nacional, nos permiten procesar pedidos en 24–48 horas para todo México. Ofrecemos tarifas preferenciales de paquetería y opciones de envío urgente para que tus herramientas lleguen justo a tiempo.
Herramientas Wera en México: Calidad Alemana para Profesionales Exigentes
Wera: calidad e innovación alemana en herramientas profesionales
Wera es una marca alemana con décadas de experiencia fabricando herramientas de alto desempeño. Fundada en 1936, cuenta con más de 80 años de trayectoria suministrando soluciones de calidad a profesionales de todo el mundo. Desde sus inicios, se ha enfocado en crear herramientas manuales innovadoras, ergonómicas y de alta precisión, diseñadas para cubrir una amplia gama de aplicaciones en distintos sectores. La ingeniería alemana presente en cada herramienta Wera garantiza durabilidad y rendimiento incluso bajo las condiciones de trabajo más exigentes. Este compromiso con la excelencia le ha merecido a Wera numerosos reconocimientos internacionales, incluyendo premios de diseño por la originalidad de sus soluciones.
Wera entiende la importancia tanto de la funcionalidad como del diseño inteligente en las herramientas. Su filosofía “Be a Tool Rebel” refleja un espíritu disruptivo que busca desafiar lo convencional y ofrecer a los usuarios algo realmente diferente en un mercado tradicional. Gracias a esta visión vanguardista, la marca se ha consolidado como sinónimo de calidad alemana, precisión y confianza, siendo una elección preferida por profesionales exigentes en todo el mundo.
Amplia gama de herramientas Wera para cada necesidad
Wera ofrece una amplia variedad de herramientas manuales para todo tipo de trabajos de atornillado y montaje profesional. Su catálogo abarca desde desarmadores de precisión y llaves de torque (dinamométricas) de alta exactitud, hasta ráchets (carracas) con dados para trabajos mecánicos, junto con una extensa selección de puntas intercambiables y llaves hexagonales tipo Allen. Gracias a esta diversidad, siempre existe una solución Wera ideal para cada tarea, ya sea en un taller automotriz, un proyecto eléctrico o cualquier aplicación industrial que requiera herramientas fiables.
La marca también integra tecnologías innovadoras en sus productos para facilitar el trabajo diario. Por ejemplo, sus llaves combinadas Joker cuentan con un diseño especial que sujeta firmemente las tuercas e impide que resbalen. Asimismo, los portapuntas de Wera emplean el sistema Rapidaptor, que permite cambios de puntas rápidos con una sola mano para mayor eficiencia. Otro desarrollo exclusivo es el perfil Hex-Plus en las llaves hexagonales, el cual aumenta la superficie de contacto y evita redondear los tornillos internos, prolongando la vida útil tanto de la herramienta como de las piezas ajustadas. Estas innovaciones patentadas demuestran el enfoque de Wera en la ergonomía, la seguridad y el rendimiento óptimo para el usuario profesional.
Herramientas Wera: la elección de profesionales en múltiples industrias
Profesionales de diversos sectores confían en la calidad de Wera para realizar sus tareas más críticas con seguridad y eficiencia.
En el sector eléctrico, por ejemplo, los ingenieros y electricistas utilizan desarmadores Wera certificados para hasta 1000V (norma VDE), garantizando total seguridad al trabajar en sistemas de alta tensión.
De igual manera, en el mantenimiento industrial las llaves y puntas especializadas de Wera ayudan a técnicos mecánicos y electromecánicos a efectuar reparaciones con precisión y durabilidad, incluso bajo condiciones de uso intensivo.
La industria automotriz es otro ámbito donde Wera destaca. Mecánicos y técnicos automotrices confían en las soluciones de apriete de Wera – desde puntas Torx y llaves hexagonales hasta torquímetros (llaves dinamométricas) – para lograr ensamblajes precisos y seguros en motores y vehículos completos.
Toda esta versatilidad y desempeño de categoría alemana está al alcance de los profesionales en México a través de nuestra tienda especializada, que ofrece la gama completa de herramientas Wera con asesoría experta y la garantía de calidad que caracteriza a la marca.