🚀 By October 13th: Up to 50% off Autumn Collections
IPA Cleaning Wipes
$2,150 MNPresaturated general purpose wipes
ACL Staticide® IPA Cleaning Wipes are an essential work bench companion for the removal of solder pastes, inks, adhesives, and flux residues. Packaged in a convenient dispensing canister, these presaturated towels are safe for plastics and metals and suitable for the cleansing of printed circuit boards, hardline coax cables,and for restoring automatic and semi-automatic printer stencils to a spotless state.
- Convenient pop-up container
- Removes oil, grease, ionic, and non-ionic residues
- Towel size: 5 x 8 inch perforated wipe
- 54% cellulose/ 46% polyester hydroentangled low-lint fabric
- 70% high-purity electronics-grade isopropyl alcohol and 30% deionized water
- Flammable
- RoHS Compliant
- 7600 canister wipes is Made in the USA
- Refill replacement rolls available
- Save more! Buy the 7630 kit: one filled canister with THREE refill rolls
Product #7600 100 wipes per canister; 6 canisters per case
Reflow Oven Cleaner
$1,626 MNFast-Acting for Burned-on Flux Residues
ACL’s Reflow Oven Cleaner is a high performance solution for cleaning reflow ovens, wave soldering systems, and heat exchanger systems. It removes all types of flux residues including no-clean, water-based, and lead-free. Ideal for periodic preventive maintenance, Reflow Oven Cleaner keeps equipment operating at peak levels.
The trigger spray-bottle delivery system is easy to use and eliminates the need for propellants. Non-flammable, it is fully compliant with California VOC requirements (CARB), REACH, and RoHS.
- Non-flammable
- Non-ozone depleting
- Low VOC; low odor
- Safe on warm ovens
- Halide-free; prevents ionic contamination
- IPA-free
32 oz bottle; 6 bottles per case
IPA Cleaning Wipes Roll
$2,788 MNPresaturated general purpose wipes
ACL Staticide® IPA Cleaning Wipes are an essential work bench companion for the removal of solder pastes, inks, adhesives, and flux residues. Packaged in a convenient dispensing canister, these presaturated towels are safe for plastics and metals and suitable for the cleansing of printed circuit boards, hardline coax cables,and for restoring automatic and semi-automatic printer stencils to a spotless state.
- Convenient pop-up container
- Removes oil, grease, ionic, and non-ionic residues
- Towel size: 5 x 8 inch perforated wipe
- 54% cellulose/ 46% polyester hydroentangled low-lint fabric
- 70% high-purity electronics-grade isopropyl alcohol and 30% deionized water
- Flammable
- RoHS Compliant
- 7600 canister wipes is Made in the USA
- Refill replacement rolls available
- Save more! Buy the 7630 kit: one filled canister with THREE refill rolls
Product #7625 100 wipes per replacement roll; 10 rolls per case
ACL Flux Remover No Clean
$3,524 MNExtra strength for removing no clean flux
Flux Remover No Clean is an extra-strength solvent that removes heavy and encrusted flux deposits resulting from no clean soldering applications. This powerful cleaner penetrates quickly into hard to reach areas and will evaporate quickly leaving no residues. Use the brush applicator for the removal of heavy soils.
The Flux Remover No Clean is suitable to use on printed circuit boards, motors, generators, metal housings, plugs,sockets, relays, contacts, switches, heat sinks, chip carriers, surface mount devices and pads.
- Quickly removes all rosin and no-clean flux types
- Removes encrusted, hard, baked-on fluxes and residues
- Non-corrosive; safe to use on metal
- Evaporates quickly and leaves no residue
- Ozone safe: contains no CFC’s or HCFC’s
- Flammable
- Low odor
12oz (340g) aerosol can; 12 per case
Mighty Mask
$2,674 – $3,881 MNPeelable Solder Masking Agent
ACL Mighty Mask is a fast curing, temporary masking agent designed for a variety of electronics manufacturing applications. It safeguards component-free areas on PCBs during soldering and on components during conformal coating processes.
A special heat-resistant compound is added to the latex to provide short-term, high-temperature protection which makes it ideal for temperature-sensitive components in hand and wave soldering. In some environments, Mighty Mask’s swift cure time allows for usable, tack-free mask in 1 hour at 160F or 3 hours in ambient temperatures
This plastic-safe, peelable solder mask removes easily by hand or with tweezers without leaving contaminating or corrosive residues. It is compatible with all cleaning solvents and flux types.
- Compatible with rosin, lead-free, and water-soluble fluxes
- Dries fast, peels off easily
- Leaves no residue or contaminants
- Non-corrosive and safe for metals
- RoHS compliant
- Made in USA
Product #8691 8oz (236 ml) squeeze bottle; 12 per case Product #8791 1-gallon container; 1 per case
Heavy Duty Low Lint Wipes
$7,751 MNIdeal for applying IPAs, solvents and liquids.
Like our other low-linting wipes, the ACL Staticide® Heavy Duty Low-Lint Wipes provide an economical value for all-purpose cleaning in industrial environments, but offer slightly more absorbancy. Soft and strong, these low-particle wipes hold liquid without breaking down or causing lint contamination.
Comprised of a hydroentangled blend of cellulose and polyester fibers, this non-woven material uses no binders and exhibits lower particle and fiber release than other comparable products. While the polyester lends durability and cleanliness, the cellulose fibers provide excellent sorbency. In addition, the robust fiber blend allows chemical solvents like isopropyl alcohol to be absorbed without damaging the fabric, thus making this all-purpose cleaning wipe an indispensable staple.
- 12″ x 13″, 1/4 fold
- Hydroentangled 55% Cellulose/45% Polyester nonwoven wipe
- Excellent choice for general industrial manufacturing use; clean & economical
- Maintains strength in wet applications
- Compatible with ISO Class 6+ (Class 1000) cleanroom environments
- Available in white and blue
12″x13″ wipes; 50 per bag; 12 bags per case
ACL Conformal Coating Remover
$2,926 MNRemoves a variety of conformal coating types
ACL’s Conformal Coating Remover quickly and efficiently removes many types of conformal coatings, including acrylic, silicone, and urethane conformal coatings from PCBs and other surfaces. It can be used as precision coating remover for specific areas or as a full immersion bath.
With its fast stripping action, it easily prepares surfaces for solder rework and repair. Conformal Coating Remover will not fade, crack, yellow, or discolor plastics under normal use conditions. It is compatible with most materials used in electrical and electronic assemblies and is compliant to REACH and RoHS.
- Flammable
- Safe for most plastic and PCB surfaces
- Evaporates quickly; non-corrosive
- No CFCs or HCFCs
- REACH and RoHS compliant
- Made in the USA
11oz (312g) aerosol can; 12 per case
ACL Acrylic Conformal Coating
$4,300 MNFor Insulation Against Electrical Shorts and Arcing
The ACL Acrylic Conformal Coating is suitable in spray applications for protecting printed circuit boards, components and flex circuitry from damage. This coating provides excellent electrical insulation properties that withstand hot and cold operating environments, including heat generated by electronic circuitry.
The ACL Acrylic Conformal Coating offers a minimum dielectric strength of 1100 volts/mil. This tough, transparent coating will not fragment, chip, or crack, and provides exceptional insulation and protection. Formula is ready-to-use as there is no mixing required.
- Operating temperature from -75°F/-59°C to 270°F/132°C
- High dielectric breakdown of 8300 volts/mil
- Meets MIL-I-46058C, Type AR
- Compliant to IPC-CC-830B with amendment 1
- Designed to provide effective insulation against electrical shorts and harsh environments
- No ozone-depleting substances
- Provides excellent acid resistance
- Self-healing; easily repairable
- Contains UV tracer for easy quality control
- UL 746E certified
- RoHS compliant
12oz (340g) aerosol can; 12 per case
ACL A4 All Purpose Flux Remover and Cleaner
$6,083 MNIndustrial Benchtop Essential
A4 All Purpose Flux Remover and Cleaner is an extra strength solvent that removes most types of fluxes even in areas ordinary brushing cannot reach. Specifically designed to replace chemical formulas using HCFC-141b and AK-225, the A4 formula can remove no-clean and rosin fluxes without using ozone-depleting chemicals and restricted substances.
This essential benchtop flux remover is ideal to use in general industrial settings on motors, generators, metal housings, plugs, sockets, relays, contacts, switches, heat sinks, chip carriers, surface mount devices, and printed circuit boards.
Ideal for general industrial manufacturing and electronic manufacturing and assembly.
- Replaces HCFC 141b and AK225
- Removes encrusted, hard, baked-on fluxes and residues
- Removes oil, grease, ionic, and non-ionic residues
- Cleans and removes R, RA, RMA, and all synthetic flux residues
- Non-abrasive, non-corrosive
- Evaporates quickly and leaves no residue
- Ozone safe: contains no CFC’s or HCFC’s
- Non-flammable
12oz (340g) aerosol can; 12 per case
ACL Plastic & Glass Cleaner
$1,793 MNFoaming, Non-Streaking, Static-Neutralizing Cleaner
ACL Anti-Static Plastic and Glass Cleaner effectively cleans, polishes, and neutralizes charges during use. A single application removes electrostatic buildup while also removing dirt, grease, ink, fingerprints and nicotine stains. Plastic and Glass Cleaner will not streak, smear, scratch, or abrade. Transparent surfaces are left spotless for improved optical clarity and distortion-free reading.
This foam cleaner is ideal to use on computer monitors and housings. It keeps observation windows on production equipment in pristine condition longer than other cleaners and does not contain CFC’s or HCFC’s.
- Controls static while cleaning and polishing
- Effectively removes handling oils, finger soils, and nicotine stains
- Prevents attraction of dust and dirt
- Compatible with plastics, glass, and stainless steel
- Foaming spray won’t run or drip; ideal for optical surfaces
- RoHS compliant
14oz (397g); 12 per case